Signed in as:
filler@godaddy.com
Available for 2014 through the latest 2021 models
WERKS Quiet Ride Windshield
THE NAME SAYS IT ALL!
If you are looking for an aftermarket windshield for your RT that outperforms anything available...
You are in the right place!
2014-2020 RT
2021+ RT
The right size makes a lot of difference!
The right size makes a lot of difference!
The right size makes a lot of difference!
Please contact us for help with selecting the right size. Our inputs are based on hundreds of conversations and follow ups with owners and how each size performs for different riders.
WHAT MODELS ARE AVAILABLE?
The right size makes a lot of difference!
The right size makes a lot of difference!
Quiet Ride fits BMW R 1200-1250 RT model year 2014 through 2020.
Now available for 2021 BMW R 1250 RT!
INSTALLATION
The right size makes a lot of difference!
WHAT MAKES THE QUIET RIDE DIFFERENT?
*Installation is done by simply removing your existing/current original shield, and replacing it with this one using the the same hardware from your previous stock/oem windshield. A gentle snugging of fasteners is recommended.
WHAT MAKES THE QUIET RIDE DIFFERENT?
WHAT MAKES THE QUIET RIDE DIFFERENT?
WHAT MAKES THE QUIET RIDE DIFFERENT?
The design allows you to run the screen MUCH lower and more out of line of sight than other screens. Run it even lower and you get more air onto you, but it is still smooth and quieter than other designs.
SIZING
WHAT MAKES THE QUIET RIDE DIFFERENT?
SIZING
Available in 4 sizes. Short is 22" tall. This acts slightly shorter than a stock screen. Standard is 24" tall. This is the height of a stock screen, but the Quiet Ride acts a little taller than stock in this size. Tall is 26" tall. Acts much taller than stock. I am 5'11" with a tall torso, sit on a tall seat, with bar risers. I prefer this over 24" as a comparison.
WIDTH
WHAT MAKES THE QUIET RIDE DIFFERENT?
SIZING
All Quiet Ride sizes are approximately 24.5" wide at the widest point. Measured flat across the back side. They are approximately 21.5" wide at the top where they begin to curve in. Wider at the top is key. This is where much of the performance gains were found in turbulent air.
TINT OPTION
The tint option is a light grey tint. Not a darker "smoke". Adds a finished look to the RT. Tends to hide some of the water spots under the screen that are so hard to get to when cleaning!
HOW TO ORDER
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
There are drop down menus provided for both clear and tint options to allow sales tax to be added to purchase price. Items shipping to Texas or California cannot ship without this being paid.
USE "PRODUCT PURCHASE" BUTTON BELOW
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
Click on the red "Product Purchase" button below. That brings up the product page where you can select the size Quiet Ride desired. Click on that size. That opens a page with drop menus that allow you to choose the tint option and add sales tax for Texas and California buyers.
REQUEST AN E-MAILED INVOICE TO PAY ONLINE
SALES TAX REQUIRED FOR TEXAS AND CALIFORNIA CUSTOMERS!
REQUEST AN E-MAILED INVOICE TO PAY ONLINE
Fill out contact form by clicking on red button below. Add name, phone, and full shipping information. List which size Quiet Ride desired and state clear or tint version.
A WERKS Parts invoice allowing online payment with a credit card will be e-mailed.
Contact Us
Use this form to request an e-mailed invoice to pay online. Or to ask questions about Quiet Ride windshields.
Direct e-mail: terry@werksparts.com
4731 Forest Trail, Missouri City, Texas 77459, United States
INTERNATIONAL CUSTOMERS
Prices shown below are for US customers and include shipping costs in that price.
Shipping costs vary with international orders. Canada is normally $40 US added to prices listed. Other countries are typically going to add $75 US to the prices shown below.
PayPal is the only form of payment for international orders. Please fill out form after clicking on "international orders" below. Click "SEND" button when finished. Then you will be e-mailed a PayPal invoice with shipping costs added. PayPal does the currency conversion for you. You do NOT have to open or have a PayPal account to make payment.
SHIPPING
Order shipping times will vary.
Orders can take 7-9 business days to produce. Others may ship next day. Best selling sizes ( 24"-26") are sometimes available as we may produce a number of them at one time. In peak season orders can take longer to fill even if product is in stock. Be patient, it WILL be worth the wait!
UPS for United States deliveries
Most orders ship via UPS ground. International orders typically ship via USPS.
Expedited Service
At this time we do not offer expedited services.
CONSTRUCTION
QUIET RIDE IS MADE OF CAST ACRYLIC
Cast Acrylic is the highest grade of Acrylic available. It has the highest impact resistance, most UV resistance, best optical clarity, highest scratch resistance, and is stable across temperature extremes.
It does NOT require a special coating to protect it. In fact you can polish out swirl marks and small scratches to keep your Quiet Ride looking good as new!
Reviews
Reviews
2021 BMW R 1250 RT
Quiet Ride installation
Installation video sent in by a happy customer!
*Installation is done by simply removing your existing/current original shield, and replacing it with this one using the the same hardware from your previous stock/oem windshield. A T25 TORX bit is the only tool required. Screwdriver handle is recommended, do NOT use a ratchet. A GENTLE snugging is all that is required.*
2014-2020 Mounting tip
On 2014-2020 models it can be a tight fit for the two shoulder bolts that center the screen. Place the screen and start one of the shouldered fasteners. Thread down till the shoulder is about to touch the screen. Then start the other shouldered fastener. This may require a bit of pressure on the screen to "spread" the mounting holes. Once started thread that fastener down till it contacts the screen. Then with gentle pressure get the screen up on the shoulder and thread it down a couple more turns. Then using gentle pressure get the other shouldered fastener to fit into the mounting hole. Snug down both fasteners. Continue with the moulding fastening process. These shouldered fasteners can be a tight fit on some bikes. Due to manufacturing tolerances in the brackets, and how we want the Quiet Ride to fit, the first time mounting may be a bit tight.
Warranty
Warranty:
We proudly stand behind our products and warrant all windshields to be free from defective materials and/or workmanship. WERKS Parts LLC covers all windshield products against defects in the material or workmanship for one year from date of purchase by the original consumer purchaser. Warranty cannot be transferred at any time. This warranty is limited to the replacement of the defective product. The WERKS Parts LLC warranty does not cover scratches, crazing, cracking, or breakage sustained in the normal course of use, or any damage resulting from intentional misuse. Warranty is void if windshield is modified by consumer at any time.
Disclaimer: There is no allowance for any installation or removal costs associated with the defective product.
To file a warranty claim to replace a defective product, please call 281-851-8636 or e-mail info@werksparts.com . You will be required to provide all information for original order including where you originally placed the order, the name it was placed under, the date it was purchased, and the method of payment.
RETURN POLICY
Returns:
NOTE: All custom designed windshields, and special orders not offered on our website as standard products are final sales. They cannot be returned or exchanged at any time.
In order for a refund or exchange to be possible, the returned item must be returned within 14 days from the delivery date. The item must be returned in the same condition as received (new, unused, undamaged, unmodified, and cannot have been mounted). The item must also be returned in the original packaging and display valid authorization number on outside of package, or they will be refused at delivery.
Shipping and Handling charges:
Shipping and Handling charges for all completed orders that have been shipped from our facility will not be refunded at any time. WERKS Parts will not be responsible for the shipping charges incurred for returns or exchanges. They will be the buyer’s responsibility and will not be reimbursed. Returned items must be shipped prepaid and insured.
Restocking Fees:
The will be a standard 15% re-stocking fee applied to all returns and exchanges. Windshields will be inspected upon receipt and will be assessed for any damage. Products that arrive with signs of wear that have been mounted, or damaged in any way will be assessed for refurbishing/servicing needed, which will result in a higher re-stocking fee (20%-40%). If damage or scratching is too severe to be completely removed, a refund will not be issued. If a refund is not possible for any reason, the returned item will be sent back to the customer, at no charge.
**If you need to return an item, please contact WERKS Parts for Return Authorization, as all returned items must have the proper authorization prior to being sent back.**
WERKS Parts
4731 Forest Trail Missouri City Texas 77459
Copyright © 2021 WERKS Parts - All Rights Reserved.
Junior Sponaugle Web Design
Powered by GoDaddy
WERKS Clutch Shop
Clutch shop will be closed Thursday 9/23 through Tuesday 9/28. No shipping or clutch builds during this period. Quiet Ride sales not effected.